Renesas Emulator System E8 - Manual (Page 135)

6.16 Break Function
The emulator has PC and hardware break functions. With the High-performance Embedded
Workshop, a PC breakpoint can be set using the [Breakpoint] sheet of the [Event] window, and a
hardware break condition can be set using the [Breakcondition] sheet.
An overview and setting of the break function are described below.
6.16.1 PC Break Function
The emulator can set up to 255 PC breakpoints. Other methods for setting a PC breakpoint than in
section 6.7, Setting a PC Breakpoint, are described below.
• Select [Eventpoints] from the [Code] submenu of the [View] menu. The [Eventpoint] window
is displayed.
• Select the [Breakpoint] sheet.
Figure 6.29 [Eventpoint] Window (Before PC Breakpoint Setting)
117