Important notes, Power supply, Placement – Roland X-6 User Manual
Page 4
4
022a
• Always turn the unit off and unplug the power cord before
attempting installation of the circuit board (SRX series; p. 240, p.
242, DIMM; p. 244, p. 246).
..........................................................................................................
023
• DO NOT play a CD-ROM disc on a conventional audio CD
player. The resulting sound may be of a level that could cause
permanent hearing loss. Damage to speakers or other system
components may result.
..........................................................................................................
026
•
Do not put anything that contains water (e.g., flower vases) on this
unit. Also, avoid the use of insecticides, perfumes, alcohol, nail polish,
spray cans, etc., near the unit. Swiftly wipe away any liquid that spills
on the unit using a dry, soft cloth.
..........................................................................................................
101a
• The unit should be located so that its location or position does not
interfere with its proper ventilation.
..........................................................................................................
101c
• This unit for use only with Roland stand KS-12 (Fantom-X6/
Fantom-X7) / KS-17 (Fantom-X8). Use with other stands (or carts)
is capable of resulting in instability causing possible injury.
..........................................................................................................
102b
• Always grasp only the plug on the power-supply cord when
plugging into, or unplugging from, an outlet or this unit.
..........................................................................................................
103a:
• At regular intervals, you should unplug the power plug and clean
it by using a dry cloth to wipe all dust and other accumulations
away from its prongs. Also, disconnect the power plug from the
power outlet whenever the unit is to remain unused for an
extended period of time. Any accumulation of dust between the
power plug and the power outlet can result in poor insulation and
lead to fire.
104
• Try to prevent cords and cables from becoming entangled. Also,
all cords and cables should be placed so they are out of the reach
of children.
..........................................................................................................
106
• Never climb on top of, nor place heavy objects on the unit.
..........................................................................................................
107b
• Never handle the power cord or its plugs with wet hands when
plugging into, or unplugging from, an outlet or this unit.
..........................................................................................................
108a
• Before moving the unit, disconnect the power plug from the
outlet, and pull out all cords from external devices.
..........................................................................................................
109a
• Before cleaning the unit, turn off the power and unplug the power
..........................................................................................................
110a
• Whenever you suspect the possibility of lightning in your area,
pull the plug on the power cord out of the outlet.
..........................................................................................................
115a
• Install only the specified circuit board(s) (SRX Series, DIMM).
Remove only the specified screws (p. 240, p. 242, p. 244, p. 246, p.
248).
..........................................................................................................
118
• Should you remove the screws that fasten the bottom panel (the
front panel of the Fantom-X8) or the PC card protector, be sure to
place them out of children’s reach, so there is no chance of them
being swallowed accidentally.
..........................................................................................................
291b
In addition to the items listed under “IMPORTANT SAFETY INSTRUCTIONS” and “USING THE UNIT SAFELY” on pages 2–4, please read
and observe the following:
Power Supply
301
• Do not connect this unit to same electrical outlet that is being used by an
electrical appliance that is controlled by an inverter (such as a refrigerator,
washing machine, microwave oven, or air conditioner), or that contains a
motor. Depending on the way in which the electrical appliance is used,
power supply noise may cause this unit to malfunction or may produce
audible noise. If it is not practical to use a separate electrical outlet, connect
a power supply noise filter between this unit and the electrical outlet.
307
• Before connecting this unit to other devices, turn off the power to all units.
This will help prevent malfunctions and/or damage to speakers or other
devices.
308
• Although the LCD and LEDs are switched off when the POWER switch is
switched off, this does not mean that the unit has been completely discon-
nected from the source of power. If you need to turn off the power
completely, first turn off the POWER switch, then unplug the power cord
from the power outlet. For this reason, the outlet into which you choose to
connect the power cord's plug should be one that is within easy reach and
readily accessible.
Placement
351
• Using the unit near power amplifiers (or other equipment containing large
power transformers) may induce hum. To alleviate the problem, change
the orientation of this unit; or move it farther away from the source of
interference.
352a
• This device may interfere with radio and television reception. Do not use
this device in the vicinity of such receivers.
352b
• Noise may be produced if wireless communications devices, such as cell
phones, are operated in the vicinity of this unit. Such noise could occur
when receiving or initiating a call, or while conversing. Should you
experience such problems, you should relocate such wireless devices so
they are at a greater distance from this unit, or switch them off.
354a
• Do not expose the unit to direct sunlight, place it near devices that radiate
heat, leave it inside an enclosed vehicle, or otherwise subject it to temper-
ature extremes. Excessive heat can deform or discolor the unit.
355b
• When moved from one location to another where the temperature and/or
humidity is very different, water droplets (condensation) may form inside
the unit. Damage or malfunction may result if you attempt to use the unit
in this condition. Therefore, before using the unit, you must allow it to
stand for several hours, until the condensation has completely evaporated.
358
• Do not allow objects to remain on top of the keyboard. This can be the
cause of malfunction, such as keys ceasing to produce sound.
IMPORTANT NOTES
Fantom-X678_r_e.book 4 ページ 2007年3月20日 火曜日 午前10時20分