Roland X-6 - Manual (Page 105)

105
Playing in Performance Mode
When playing back a song, you can choose to hear just a specific part
play by itself.
1. Press [MIXER] to access the Mixer screen.
2. Use to move the cursor to the solo switch.
3. Turn the VALUE dial or press [INC] or [DEC] to turn the
SOLO switch on/off.
fig.08-016_50
This setting is linked with the Solo Part Select parameter (Part
View screen), and can be saved as a performance setting.
When playing along with a song, you can turn off (i.e., mute) parts
you don't want to hear. This allows you to turn off the melody part
for karaoke applications or for practicing the muted part.
1. Press [MIXER] to access the Mixer screen.
2. Use to move the cursor to the mute switch.
3. Turn the VALUE dial or press [INC] or [DEC] to turn the
MUTE switch on/off.
fig.08-016a_50
Part Mute does not turn off the MIDI receive switch; rather, it
sets the volume to the minimum setting to silence the sound.
Therefore, MIDI messages are still received.
Part Mute does not turn off the MIDI receive switch; rather, it
sets the volume to the minimum setting to silence the sound.
Therefore, MIDI messages are still received.
You can use the pads to switch part muting on/off. Pad numbers 1–
16 correspond to part numbers 1–16.
1. Press [MIXER] to access the Mixer screen.
2. Press [F3 (Mute)].
The Muting Parts with Dynamic Pads screen will appear.
At this time, the pads will function as mute on/off buttons; each
time you press a pad, muting will be switched on or off.
• Pad lit: muted
• Pad unlit: not muted
Pressing [F6 (All Mute)] will mute all parts. Pressing [F7 (All
Play)] will un-mute all parts.
Selecting a Part to Play
Individually (Solo)
Silencing the Playback of a Specific
Part (Mute)
Using pads to mute Parts
Fantom-X678_r_e.book 105 ページ ２００７年３月２０日 火曜日 午前１０時２０分