Changing realtime controller settings, Realtime controller knob settings, Assignable switch settings – Roland X-6 User Manual
Page 125: 125 modifying the sound in real time
125
Modifying the Sound in Real Time
Realtime Controller Knob Settings
1.
Hold down [SHIFT] and rotate one of the REALTIME
CONTROL knobs.
The Knob screen appears.
fig.10-008_50
2.
Move the cursor to the parameter that you want to set, and
turn the VALUE dial or press [INC]/[DEC] to set it.
3.
If you want to save your settings, press [F8 (System Write)].
Press [Exit] to return to the previous screen.
Realtime controller settings are saved independently for each
performance as part of the performance settings. This lets you
create performances that make effective use of controller
settings.
Knob Assign 1–4 (Realtime Control Knob
Assign 1–4)
Specify the functions that will be controlled by the [
] knobs.
Value
CC01–31, 33–95:
Controller numbers 1–31, 33–95
For more information about Control Change messages, please
refer to
PITCH BEND:
Pitch Bend
AFTERTOUCH:
Aftertouch
ARP STYLE:
Arpeggio Style
ARP GRID:
Arpeggio Grid
ARP DURATION:
Adjusts the duration of each arpeggiated note
ARP MOTIF:
Arpeggio Motif
CHORD FORM:
Chord form of the Chord Memory function
MASTER LEVEL:
The volume of the entire Fantom-X
*
Master Level adjusts the volume both of the OUTPUT A jacks and the
DIGITAL OUT jack. The panel VOLUME knob only adjusts the
volume of the OUTPUT A jacks.
ARP STEP:
Controls the playback position of the arpeggio
pattern.
DIGITAL IN:
Input level from DIGITAL IN.
Assignable Switch Settings
1.
Hold down [SHIFT] and press one of the ASSIGNABLE SW
button.
The Switch screen appears.
fig.10-009_50
2.
Move the cursor to the parameter that you want to set, and
turn the VALUE dial or press [INC]/[DEC] to make the
setting.
3.
If you want to save your settings, press [F8 (System Write)].
Press [Exit] to return to the previous screen.
Realtime controller settings are saved independently for each
performance as part of the performance settings. This lets you
create performances that make effective use of controller
settings.
Switch Assign
Specify the function that will be controlled by the assignable switch.
Value
TRANSPOSE DOWN
:
Lowers the key range in semitone steps (up
to 5 semitones lower).
TRANSPOSE UP:
Raises the key range in semitone steps (up to
6 semitones higher).
TAP TEMPO:
Tap tempo (a tempo specified by the interval
at which you press the button).
MONO/POLY:
Pressed to toggle between polyphonic
(POLY) and monophonic (MONO) play of a
patch.
PORTAMENTO:
Portamento On/Off
HOLD:
Hold play On/Off
MFX1–3 SW:
Multi-effect 1–3 switch
CHORUS SW:
Chorus switch
REVERB SW:
Reverb switch
MASTERING SW:
Mastering switch
LOOP:
Loop play On/Off
RHY START/STOP:
Rhythm pattern playback On/Off
If Patch mode is selected, assignable switches are available
when the keyboard part is selected.
Changing Realtime Controller Settings
Fantom-X678_r_e.book 125 ページ ２００７年３月２０日 火曜日 午前１０時２０分