Knob, Switch, 117 creating a performance – Roland X-6 User Manual
Page 117
117
Creating a Performance
Knob
fig.09-016_50
For details on these settings, refer to
Controlled by the Realtime Controllers or D Beam
Knob parameters are valid only when the REALTIME
CONTROL button is set to “ASSIGNABLE.”
Knob Assign 1–4
(Realtime Control Knob Assign 1–4)
Specify the functions that will be controlled by the [
] knobs.
Value
CC01–31, 33–95:
Controller numbers 1–31, 33–95
For more information about Control Change messages, please
refer to
Pitch Bend:
Pitch Bend
Aftertouch:
Aftertouch
Arp Style:
Arpeggio Style
Arp Grid:
Arpeggio Grid
Arp Duration:
Adjusts the duration of each arpeggiated note
Arp Motif:
Arpeggio Motif
Chord Form:
Chord form of the Chord Memory function
Master Level:
The volume of the entire Fantom-X
*
Master Level adjusts the volume both of the OUTPUT A jacks and the
DIGITAL OUT jack. The panel VOLUME knob only adjusts the
volume of the OUTPUT A jacks.
Arp Step:
Controls the playback position of the arpeggio
pattern.
Digital In:
Input level from DIGITAL IN.
Switch
fig.09-017_50
For details on these settings, refer to
Controlled by the Realtime Controllers or D Beam
Switch 1/2 (Assignable Switch 1–2)
Specify the functions that will be controlled by the [
]/[
]
buttons.
Value
Transpose Down:
Lowers the key range in semitone steps (up to 5
semitones lower).
Transpose Up:
Raises the key range in semitone steps (up to 6
semitones higher).
Tap Tempo:
Tap tempo (a tempo specified by the interval at
which you press the button).
Mono/poly:
Pressed to toggle between polyphonic (POLY)
and monophonic (MONO) play of a patch.
Portamento:
Portamento On/Off
Hold:
Hold play On/Off
MFX1–3 Sw:
Multi-effect 1–3 switch
Chorus Sw:
Chorus switch
Reverb Sw:
Reverb switch
Mastering Sw:
Mastering switch
Loop:
Loop play On/Off
Rhythm Start/Stop:
Rhythm pattern playback On/Off
Fantom-X678_r_e.book 117 ページ ２００７年３月２０日 火曜日 午前１０時２０分