Tone name (naming a tone) – Roland V-Synth GT User Manual
Page 82
82
Patch Mode (Editing a Tone)
Before you save the tone, here’s how to give it a new name. You can assign a name of up to twelve characters to a tone.
1.
Make sure that the tone that you want to name is selected.
2.
Touch
A pulldown menu appears.
fig.06a-01.eps_50
3.
In the pulldown menu, touch
The Tone Name window appears.
fig.06a-04.eps_50
4.
Touch the on-screen alphabetic or numeric keys to enter the new name in the text box.
The on-screen keys have the following functions.
5.
When you have finished inputting, touch
If you want to return to the original unedited name, touch
* You will lose your edited tone settings if you switch to another tone or turn off the power. If you want to keep a tone whose settings
you have edited, then perform the Save operation (p. 81).
* You can also assign a category to the tone (p. 83).
Tone Name (Naming a Tone)
< << >< >> >
Move the cursor in the text box to the desired input location.
Turn this on when you want to input uppercase letters or symbols.
Erases all characters in the text box.
Deletes the character that precedes the cursor location.
Deletes the character at the cursor location.
V-Synth-GT_e.book 82 ページ ２００７年４月９日 月曜日 午後１時４６分