Tone-fx (tone effect), Routing, For details, refer to – Roland V-Synth GT User Manual
Page 139: P. 139), Apply a tone effect (p. 139), Tone-fx send level (p. 139), Chorus send level (p. 139), Reverb send level (p. 139)
139
Editing a Tone (Pro Edit)
Com
MOD
COSM1/2
TVA
OSC1/2
AP Syn
Effects
The V-Synth GT contains three high-quality effects: Tone-FX (tone effect), Chorus, and Reverb. The tone effect can be
applied to individual tones, and the amount of signal sent to chorus and reverb can be specified for each tone.
The effect blocks are displayed as small rack units. By turning each effect on/off you can freely specify the connecting
path (signal flow).
fig.06b-80-j.eps_50
Tone-FX (Tone Effect)
Routing
Parameter
Value
Description
TVA Tone-FX Send
(TVA Tone-FX Send Level)
0–127
Sets the level of the signal sent to Tone-FX.
TVA CHO Send
(TVA Chorus Send Level)
0–127
Sets the level of the signal sent to chorus.
TVA REV Send
(TVA Reverb Send Level)
0–127
Sets the level of the signal sent to reverb.
TVA Output Assign
T-FX
Outputs the direct sound in stereo through Tone-FX. You can also apply cho-
rus or reverb to the sound that passes through Tone-FX.
MAIN
Outputs the direct sound to the MAIN OUT jacks in stereo without passing
through Tone-FX.
DIR
Outputs the direct sound to the DIRECT OUT jacks in stereo without passing
through Tone-FX. Make this setting when you want to use external effects.
AP Syn Tone-FX Send
(AP Syn Tone-FX Send Level)
0–127
Sets the level of the signal sent to Tone-FX.
AP Syn CHO Send
(AP Syn Chorus Send Level)
0–127
Sets the level of the signal sent to chorus.
AP Syn REV Send
(AP Syn Reverb Send Level)
0–127
Sets the level of the signal sent to reverb.
AP Syn Output Assign
T-FX
Outputs the direct sound in stereo through Tone-FX. You can also apply cho-
rus or reverb to the sound that passes through Tone-FX.
MAIN
Outputs the direct sound to the MAIN OUT jacks in stereo without passing
through Tone-FX.
DIR
Outputs the direct sound to the DIRECT OUT jacks in stereo without passing
through Tone-FX. Make this setting when you want to use external effects.
Tone-FX On/Off Switch
Tone-FX
➝ Reverb Send Level
Tone-FX Master Level
Tone-FX Type
Tone-FX
➝ Chorus Send Level
V-Synth-GT_e.book 139 ページ ２００７年４月９日 月曜日 午後１時４６分