Roland V-Synth GT - Manual (Page 223)

223
Utility Mode
Connecting the V-Synth GT to Your Computer
1. Make sure that the power of the V-Synth GT is turned off.
2. Start up your computer.
3. Connect the V-Synth GT and your computer using a USB cable.
fig.09-15_j.eps_50
4. Turn on the power of V-Synth GT.
5. Touch in the Utility Menu screen.
The USB Storage screen appears.
fig.09-11-ps.eps_50
6. Touch to establish the connection with your computer.
7. When the USB connection is established, a new drive icon will appear on your desktop.
8. Once the V-Synth GT is connected, you can transfer files by operating your computer.
Mac Users
Computer
USB
Connector
USB Cable
V-Synth GT
V-Synth-GT_e.book 223 ページ ２００７年４月９日 月曜日 午後１時４６分