Roland V-Synth GT - Manual (Page 55)

55
Patch Mode (Editing a Patch)
Specifying the Upper Tone and Lower Tone
A patch consists of an upper tone and a lower tone. When selecting a tone, you must first specify which one you’re
selecting—upper or lower.
1. Press [PATCH] to access the Patch Play screen.
2. Touch or to select the tone you want to specify.
Alternatively, press [SELECT] so it’s lit, then press [TONE LOWER]/[TONE UPPER].
fig.05-01-j.eps
If you don’t want the lower or upper tone to be sounded, touch the tone switch to turn it off.
Alternatively, press [SELECT] so it’s not lit, then press [TONE LOWER]/[TONE UPPER] to turn off a tone.
Selecting a Tone
Tone Switch
Upper Tone
Tone Switch
Lower Tone
V-Synth-GT_e.book 55 ページ ２００７年４月９日 月曜日 午後１時４６分