Roland V-Synth GT - Manual (Page 161)

161
Editing a Tone (SOUND SHAPER II)
Here you can use the [E1]–[E8] knobs to edit the most important AP-Synthesis parameters.
fig.06c-10-ps.eps_50
1. Use the AP-Synthesis switch to turn AP-Synthesis on/off.
2. Use the [E1] knob to select the source wave.
You can also use the VALUE dial or [INC/+] [DEC/-] to change this.
3. Touch the screen to select the desired phrase model.
The available phrase models will depend on the source wave you’ve selected.
4. Use the [E2] knob to edit the AP-Synthesis level.
5. Use the [E3]–[E8] knobs to edit the AP-Synthesis parameters.
For details on each parameter, refer to “AP Syn (AP-Synthesis)” (p. 124).
AP-Synthesis
AP-Synthesis Level
Phrase Model
Source Wave
AP-Synthesis Modify Parameters
AP-Synthesis Switch
V-Synth-GT_e.book 161 ページ ２００７年４月９日 月曜日 午後１時４６分