Roland V-Synth GT - Manual (Page 142)

142
Editing a Tone (Pro Edit)
The Multi Step Modulator is a function that modulates the value of various parameters according to a sixteen-step
sequence. On the V-Synth GT, the patterns of this sequence are managed as “tracks.” You can simultaneously use up
to four tracks, with each track containing a different sequence. You can use the panel knobs to freely modify the
sequence pattern.
1. Press [PATCH] to access the Patch Play screen.
2. Touch .
fig.03-step04
The Multi Step Modulator screen will appear.
fig.03-step02
3. Turn ON.
The Multi Step Modulator will be applied to the currently selected patch.
4. Touch < A >–< D > to turn tracks on/off as desired.
* If you turn all of the tracks off, there will be no effect even if is ON.
fig.StepModTrackSW
Using Steps to Vary the Sound (Multi Step Modulator)
Multi Step Modulator Switch
V-Synth-GT_e.book 142 ページ ２００７年４月９日 月曜日 午後１時４６分