Roland V-Synth GT - Manual (Page 232)

232
Utility Mode
Perform this adjustment if the Time Trip pad no longer responds as you expect.
1. In the Utility Menu screen, touch .
The Calibration screen appears.
fig.09-30-ps.eps_50
2. Touch .
The TT Pad Calibration screen appears.
fig.09-32-ps.eps_50
3. On the Time Trip pad, touch the points indicated by the square symbol in the screen, in the following order: left
→ top → right → bottom.
When you have touched all four points, the screen will close, and the sensitivity of the Time Trip pad will be
calibrated.
fig.09-38.eps_50
Adjusting the Positional Accuracy of the Time Trip Pad
V-Synth-GT_e.book 232 ページ ２００７年４月９日 月曜日 午後１時４６分