Roland V-Synth GT - Manual (Page 154)

154
Vocal Designer
Compressor: Reduces high-level sounds and boosts low-level sounds, thus improving the overall volume balance of
the sound.
fig.06d-14-ps.eps
Comp
Parameter Value Description
Mic/Compressor Switch OFF, ON Turns the compressor on/off.
CP Ratio (Compressor Ratio) 1:1.0–1:16,
1:INF Specifies the compression ratio.
CP Threshold
(Compressor Threshold) -36–0dB Specifies the level at which compression will begin.
CP Attack (Compressor Attack) 0–100 Specifies the time from when the input exceeds the Threshold until the volume
begins to be compressed.
CP Release (Compressor Release) 0–100 Specifies the time it is to take after the input falls below the Threshold before
compression ceases.
CP Gain (Compressor Gain) 0–24 dB Specifies the output gain.
V-Synth-GT_e.book 154 ページ ２００７年４月９日 月曜日 午後１時４６分