Roland V-Synth GT - Manual (Page 62)

62
Patch Mode (Editing a Patch)
“Initialize” means to return the settings of the currently selected patch to a standard set of values.
The Initialize operation will affect only the currently selected patch; the patches that are stored in internal memory
and temporary area will not be affected. If you wish to restore all of the V-Synth GT’s settings to their factory values,
perform a Factory Reset (p. 235).
1. Access the Patch Play screen, and select the patch that you wish to initialize (p. 40).
2. Touch
A pulldown menu appears.
fig.05-03.eps_50
3. In the pulldown menu, touch .
A window like the following appears.
fig.05-09-ps.eps_50
4. If you also want to initialize the tones used in the patch, check the boxes for the tone(s) you want to initialize.
5. Touch .
The initialization will be carried out.
Patch Init (Initializing the Patch Settings)
V-Synth-GT_e.book 62 ページ ２００７年４月９日 月曜日 午後１時４６分