beautypg.com

Using vocal designer, Panel. (p. 148), Connecting a mic – Roland V-Synth GT User Manual

Page 148

background image

148

Vocal Designer

Connecting a Mic

1.

Connect your mic to the “MIC IN jack.”

2.

Press INPUT [SETTING] on the panel.

The Audio Input Settings screen will appear.

fig.06d-16-ps.eps_50

3.

Check the mic settings.

fig.06d-17.eps_50

While vocalizing into the mic, use the panel’s INPUT MIC LEVEL knob to adjust the volume so that the Level
indicator in the screen does not quite light red.
If the Peak indicator lights, the volume is too high.

4.

Press [EXIT] to return to the previous screen.

Using Vocal Designer

V-Synth-GT_e.book 148 ページ ２００７年４月９日　月曜日　午後１時４６分

See also other documents in the category Roland The input devices: