2 if an error is detected in the self-check, Important – Renesas M3028BT-EPB User Manual

Page 31

Text mode
Original mode

M3028BT-EPB User’s Manual

2. Setup

REJ10J1459-0200 Rev.2.00 Sep 16, 2006

2.8.2 If an Error is Detected in the Self-check
If the self-check does not result normally (ERROR 1 to ERROR 4 in Figure 2.6), check the following.

(1) Recheck the connection of the emulation probe and PC7501.
(2) Redownload the proper firmware.

IMPORTANT

Notes on the Self-check:

Disconnect the user system before execute the self-check.

If the self-check does not result normally (excluding user system errors), the emulation probe may be damaged.

Then contact your local distributor.

Page 29 of 86