Roland RD-300 - Manual (Page 66)

68
Detailed Settings for Each Function
File Management
Saving a Live Set File ( LIVE SET Save)
A single, individual fi le containing a collection of 60 Live Sets
registered to the RD-300NX is called a “Live Set fi le.”
This Live Set fi le can be saved in the RD-300NX’s internal memory or
on USB memory (sold separately) connected to the USB MEMORY
connector.
MEMO
If you want to save the changed settings of a system parameter
(p. 69), memorize settings by pressing the [LAYER EDIT] (WRITE)
button, then save an Live Set fi le.
1. Press the [MENU] button, getting the indicator to light .
The EDIT MENU screen appears.
2. Press the Cursor [ ] [ ] buttons to select “5 .File,” then
press the [ENTER] button .
The EDIT screen appears.
3. Press the Cursor [ ] button to select “0 . LIVE SET Save,” then
press the [ENTER] button .
The following screen appears.
4. Press the [LAYER EDIT] (MEDIA) button to select the save
destination for the Live Set fi le .
Value Description
INT
The data will be stored in the RD-300NX’s internal
memory.
USB
The data will be stored on USB memory connected to
the USB MEMORY connector on the rear panel.
5. Press the Cursor [ ] [ ] buttons to move the cursor to the
positions where the characters are to be input .
6. Use the [DEC] [INC] buttons to enter the name .
Names can consist of up to 16 characters.
The following characters are available.
space ! # $ % & ‘ ( ) + , - . 0–9 ; = @ A–Z [ ] ^ _ ` a–z { } ~
When the [TONE EDIT] (DELETE) button is pressed, one character is
deleted; while holding down the [SHIFT] button, press the [TONE EDIT]
(INSERT) button to insert a single-character blank space.
NOTE
You can’t save a Live Set fi le with a name that starts with a “.
(period)”. Do not use a “. (period)” at the beginning of the name.
7. Repeat steps 5–6 to input the name .
8. When you’ve fi nished entering the fi le name, press the
[ENTER] button .
The Live Set fi le will be saved.
NOTE
“Executing...” appears in the display while the save is in progress. Be
sure never to turn off the power.
MEMO
If a fi le with the same name has already been saved, the
confi rmation message “Overwrite OK?” appears. To overwrite the
Live Set fi le, press the [ENTER] button; to save the fi le under a
diff erent name, press the [EXIT/SHIFT] button.
9. Press the [MENU] button, extinguishing its indicator .
You’ll be returned to the Live Set screen or the One Touch screen.