Roland RD-300 - Manual (Page 30)

32
Performance
Adding Reverberation to the Sound ( REVERB)
The RD-300NX can apply a reverb eff ect to the notes you play on the keyboard.
Applying reverb adds pleasing reverberation to what you play, so it sounds almost as if you were playing in a concert hall.
2
2 1
1. Press the [REVERB] button, getting its indicator to light .
Reverb is turned on.
Reverb will alternately turn on/off each time you press the [REVERB] button.
MEMO
Types of reverb can be selected in “Reverb Type” (p. 66) of the “3. Eff ects” EDIT screen.
2. Hold down the [REVERB] button and use the [INC] [DEC] buttons to adjust the amount of reverb .
Pressing the [INC] button will deepen the reverb; pressing the [DEC] button will lessen the reverb.
You can adjust the reverb depth in a range of 0–127.
NOTE
If the layer setting (LAYER EDIT) “REV (Reverb Amount)” is at “0,” there will be no eff ect even if you adjust the reverb depth (p. 49).
Adding Breadth to the Sound ( CHORUS/ DELAY)
You can apply a chorus and delay eff ect to the notes you play on the keyboard.
By adding the chorus and delay eff ect, you can give the sound greater dimension, with more fatness and breadth.
2
2 1
1. Press the [CHORUS] button, getting its indicator to light .
Chorus is turned on.
Chorus will alternately turn on/off each time you press the [CHORUS] button.
MEMO
Types of chorus can be selected in “Chorus Type” (p. 66) of the “3. Eff ects” EDIT screen.
2. Hold down the [CHORUS] button and use the [INC] [DEC] buttons to adjust the amount of chorus .
Pressing the [INC] button will deepen the chorus; pressing the [DEC] button will lessen the chorus.
You can adjust the chorus depth in a range of 0–127.
NOTE
If the layer setting (LAYER EDIT) “CHO (Chorus Amount)” is at “0,” there will be no eff ect even if you adjust the chorus depth (p. 49).