Nortel Networks NN46110-602 - Manual (Page 60)

60 Chapter 3 Administrative tasks
NN46110-602
Disabling new logins
You can prevent clients from connecting to the VPN Router without affecting the
users currently connected by using this feature to disable new logins. When new
logins is disabled, no new IPsec connections are established.
To disable new logins:
1 Select Admin > Shutdown.
2 Click Disable new logins. (Figure 8)
Figure 8 Disable new logins
If you do not want to reboot the switch after you disable new logins, click
None in the System Shutdown section.
To disable new logins using the CLI, enter the following command:
CES# reload [at ] [boot-drive] [boot-normal | boot-safe]
[config-file] [power-off | restart] disable-logins
Upgrading the software
To upgrade the VPN Router, download the latest Nortel software using the File
Transfer Protocol (FTP). Because FTP servers are often different, check your
server documentation for information about setting paths that can help you with
the upgrade procedure.
You can download the latest software from: