Nortel Networks NN46110-602 - Manual (Page 200)

200 Appendix C System messages
NN46110-602
Can not accept x.x.x.x as router id
Description: OSPF can not accept the given router ID in the Routing
> OSPF
window.
Action: You must change router ID in the Routing
> OSPF window. Invalid router
IDs are 127.0.0.1 and 0.0.0.0.
LoadOspfAreas Failed
Description: OSPF failed to load all areas of information from the config file.
This happens if the config file is damaged.
Action: Delete all OSPF areas, recreate them from the Routing
> OSPF window,
and reboot the VPN Router.
LoadOspfIntf Failed
Description: OSPF failed to load information for all interfaces from the config
file. This happens if the config file is damaged.
Action: Delete all OSPF interfaces, re-create them from the Routing
> Interface
window, and reboot the VPN Router.
VR xxx: Starting xxx as Master for xxx
Description: Logged when VRRP is starting as a master for an address. The
parameters are:
• The VRID of this VR
• The reason for starting, either because it was enabled or the interface went up
• The IP address
Action: No action required.