Nortel Networks NN46110-602 - Manual (Page 204)

204 Appendix C System messages
NN46110-602
RIP xxx: Unable to spawn timer task xxx for RIP
Description: Logged when RIP fails to spawn the timer task. The parameter
stands for the name of the task.
Action: No action required.
RIP xxx: cid xxx mismatched auth password from xxx
Description: Logged when RIP authentication fails while receiving RIP packets.
The first parameter is the circuit ID on which it was receiving RIP packets and the
second parameter is the IP address from which it received RIP packets.
Action: No action required.
Hardware messages
The VPN Router software provides informational messages when cards are
removed and replaced. When you exchange two cards with each other, the VPN
Router considers this two simultaneous replacements.
Interface [nnn] not present, deleting from config
Description: This indicates that the configuration file contains an interface [nnn]
entry, but there is no card in the slot. The interface [nnn] entry is deleted from the
configuration.
Action: No action required.
Interface [nnn] replaced, resetting config
Description: This indicates the card type specified in the configuration file does
not match the card type currently in the slot. The configuration information is
reset to defaults then initialized with the current hardware.
Action: No action required.