Setting the size of the ram buffer, Setting the size of a disk capture file, Setting the maximum number of disk capture files – Nortel Networks NN46110-602 User Manual
Page 114

114 Chapter 5 Packet capture
NN46110-602
For example, enter:
CES(capture-ethernet)
#filepath /ideX/system/log
Setting the size of the RAM buffer
To set the RAM buffer size, from CLI Capture Configuration Mode enter:
buffersize
<size>
where size is the size of the RAM buffer.
For example, enter:
CES(capture-ethernet)
#buffersize 1048576
Setting the size of a disk capture file
To set the size of the disk capture file, from CLI Capture Configuration Mode
enter:
filesize
<max_size>
where max_size is the size of the capture file.
For example, enter:
CES(capture-ethernet)
#filesize 10485760
Setting the maximum number of disk capture files
To set the maximum number of disk capture files, from CLI Capture
Configuration Mode enter:
maxfiles
<max_files>
where max_files is the maximum number of files to save to disk for this capture.
Note: To back up later using the autobackup functionality, the specified
file path for the PCAP files must be a directory under /ideX/system.