Nlynx ETU400 - Manual (Page 94)

ETU400 User Guide 011603 7-7
Test for the Existence of a Micro File:
The TESTB Command
With the TESTB command, you can check to see if a file exists on the
micro while you are in emulation. The host you sends a completion message
about the existence of the file.
TESTB Example
In this example, you are running emulation on your micro and you want to
check to see if a certain file exists on the micro. The micro file is
called c:\datafile.doc.
1. Choose option 20 from the ETU Main menu.
The ETU Utilities menu displays.
2. Choose option 4 from the ETU Utilities menu.
3. At the Qualified file name prompt, enter the name of the file:
c:\datafile.doc
4. Press ENTER to start the TESTB command.
A message will be sent to the display when the operation is complete.
Figure 7-4 TESTB prompt screen
Test a micro file: (TESTB)
Type choices, press Enter.
Qualified file name: . . . . . .
Notify operator: . . . . . . . . *YES *YES, *NO, *LDA
LDA position for file size: . . 1-1012
Display status messages ?: . . . *YES *YES, *NO
Bottom
F3=Exit F4=Prompt F5=Refresh F12=Cancel F13=How to use this display
F24=More keys