Nlynx ETU400 - Manual (Page 291)

ETU400 User Guide 011603 G-21
PRNTFRPC Procedure
ETU36 PRNTFRPC, workstation file name ,,, #copies , printer id
forms id cpi lpi align
, 10 10 , YES
15 15 NO
hold width translate table
YES , 198 , ATOE3
NO 132
The PRNTFRPC procedure transfers and translates a PC-DOS file and places
it on the AS/400 print spool.
Mac Users: Do not run this procedure. It is intended for use only with
PC-DOS.
workstation file name is the name of the workstation file to be
transferred to the AS/400. For additional information,
see “Workstation File Name” on page 4-2.
# copies (optional) is the number of copies of the report to
print on the AS/400. The default is one copy.
printer id (optional) is the AS/400 printer id to which the report
is to be sent. If left blank, the entry will default to
the value specified in the configuration of the
workstation on which the PRNTFRPC procedure is
executed.
forms id (optional) is the forms number (name) on which to print
the report. If left blank, the entry will default to
the value specified in the configuration of the
workstation on which the PRNTFRPC procedure is
executed.
cpi (optional) is the characters-per-inch format for the
report. If left blank, the entry will default to the
value specified in the configuration of the workstation
on which the PRNTFRPC procedure is executed.
lpi (optional) is the lines-per-inch format for the report.
If left blank, the entry will default to the value
specified in the configuration of the workstation on
which the PRNTFRPC procedure is executed.
align (optional) specifies whether a forms alignment halt
will be issued on the printer's console for this
report. The default is NO.
Hold (optional) specifies whether the report will be “held”