Nlynx ETU400 - Manual (Page 283)

ETU400 User Guide 011603 G-13
FILETOPC Procedure
ETU36 FILETOPC, AS/400 label, date ,
reformat , xlate file , xlate size , record len
*TEXT ETOA1 1000 128
, workstation file name
ETU36 FILETOPC, AS/400 label, date ,
*DIF , xlate table , xlate size , input specs
*BASICS 1000
*TAB
spec lib , workstation file name
clib
ETU36 FILETOPC, AS/400 label, date , *SAVE
*NONE
, workstation file name
The FILETOPC procedure transfers an AS/400 file from the AS/400 to the
workstation specified, and optionally translates the file into a
workstation data format.
AS/400 label is the label (name) of the file to be sent to the
workstation.
date (optional) is the date of file “AS/400 label”
(YMD format).
Reformat (optional) specifies the type of data translation to
take place on the AS/400 file.
*TEXT (or *YES)the file is to be translated into an
ASCII text format.
*DIF the file is to be translated into a DIF
format.
*BASICS the file is to be translated into a BASIC
Sequential format.
*TAB the file is to be translated into a BASIC
Sequential format with tab characters as
the field delimiters.
*SAVE permits offline storage, and moves
executable programs between workstations
(see below).
*NONE no translation of the file is to be
performed (the default).