Nlynx ETU400 - Manual (Page 228)

ETU400 User Guide 011603 D-5
4. When the SEU Edit screen appears (see Figure D-3), press F4 to display
a data area prompt in which to enter the file specification record. The
file specification record includes the form type, the name of the file
being defined, the file type, the record length, and the type of media on
which the file will reside.
To create the file specification record, enter the file description
specification in the data area prompt at the bottom of the screen exactly
as shown in Figure D-3, and then press ENTER.
Figure D-3 The SEU Edit screen
Columns . . . : 1 80 Edit
QGPL/QRPGSRC
SEU==>
SAMPLE
FMT ** ...+... 1 ...+... 2 ...+... 3 ...+... 4 ...+... 5 ...+... 6 ...+... 7 ...+... 8
*************** Beginning of data *********************************************
0001.00
****************** End of data ************************************************
Prompt type . . . ** Sequence number . . . 0001.00
Data area
....+... 1 ...+... 2 ...+... 3 ...+... 4 ...+... 5 ...+... 6
FSAMPLE IP F 128 DISK
F3=Exit F4=Prompt F5=Refresh F11=Previous record
F12=Cancel F23=Select prompt F24=More keys
Column 6 is the Form Type and must contain the letter F.
Columns 7 through 14 may contain a valid file name for documentation
purposes. The file name can be the same as the PC file name, although
it's not necessary that it is. This example uses file name SAMPLE, which
in this case is the same as the PC file name.