Nlynx ETU400 - Manual (Page 32)

ETU400 User Guide 011603 2-7
Obtaining Your Host Registration Number
1. Have the following information ready before you request your host
registration number.
9 The ETU serial number located on your ETU software media. (For most
software media, the serial number is six digits beginning with 2. For
8mm tape, the serial number is eight digits beginning with 5.)
9 Your host serial number. Display your host serial number by issuing
the following command from the AS/400 command line:
dspsysval sysval(qsrlnbr)
9 The AS/400 model you have.
9 The ETU version (for example, 5.02)
9 The name of your company, a person to contact, and a phone number.
9 FAX or phone the above information to NLynx Technologies between the
hours of 8:30 a.m. and 5:30 p.m., Central Time, Monday through Friday.
U.S. FAX: 512-301-8030 European FAX: 44-161-928-7015
U.S. phone: 888-NLynx67 European phone: 44-161-928-7014
We will phone or FAX your host registration number to you.
Entering the Registration Code
Once you receive your host registration number, you can complete the
registration procedure.
1. Add the library containing ETU to your AS/400 library list. At the
AS/400 command line, type:
addlible library-name
where library-name is the library containing ETU.
2. Enter the OWNERID command at the AS/400 command line:
ownerid
You will be prompted for the host registration number.
3. Enter your host registration number (type any alphabetic characters in
UPPER CASE).
4. Press ENTER to exit the OWNERID screen.
ETU can now be run indefinitely on the registered host system. If you re-
install ETU or its accompanying data files, you may need to re-install
the host registration number.
Re-installing ETU
If you are re-installing ETU in order to recover from a system crash or
some other system error, re-install ETU following the instructions in
Installing the ETU Software on page 2-3.