Nortel Networks Business Communications Manager (BCM) & Norstar Installation - Manual (Page 75)

Chapter 8: Appendices
Page 75
ƒ Click on the LAN CTE button and the number of active LANCTE desktops is
displayed. There must be at least one available LANCTE seat license for the
LAN CTE client to connect to
NOTE: If there is in-sufficient Permanent or Try n Buy LAN CTE license
registered, contact your Nortel Vendor or call ConverTec Sales at 1-877-937-
8228
Published IP address
The Published IP address is determined in the BCM 3.X configuration under Services
heading IP Telephony. This setting will indicate Lan1 or Lan2. You must then confirm
what IP address is associated to that LAN port by selecting Resources and expanding
the LAN tree. If the Published IP address cannot be reached from the computer the
LAN CTE client and Console.NET is being installed on, you must discuss changes with
your Nortel Authorized Dealer to correct the problem.
ƒ Open Internet Explorer and browse to the BCM IP address
https://xxx.xxx.xxx.xxx