Nortel Networks ICS 6.1 - Manual (Page 99)

90
Modular ICS 6.1 Programming Record P0603536 02
••• Restrn filters These are sets or groups of restrictions and associated overrides that specify
the external numbers or feature codes that cannot be dialed from a telephone
or line.
•••• Show filter:_ Enter the two-digit filter number.
••••• Restrn flt 00 Filter 00 is pre-set with no restrictions.
••••• Restrn flt 01 First programmable restriction. For each filter, enter up to 99 restrictions.
•••••• Deny Enter the digits you wish to be restricted when this filter is used.
•••••• Override 001 Enter the dialing sequences which are allowed to override this filter, if any.
••• Line restrns Designate restriction filters to the lines assigned to this telephone.
•••• Normal
•••• Night
•••• Evening
•••• Lunch
•••• Sched 4
•••• Sched 5
•••• Sched 6
Enter the number (two-digit) of the restriction filter to apply during normal
service and for each of the schedules.
••• Remote restrns Assign restriction filters that apply only to remote users of the line.
••••• Normal
••••• Night
••••• Evening
••••• Lunch
••••• Sched 4
••••• Sched 5
••••• Sched 6
Enter the number (two-digit) of the restriction filter to apply to remote use
during normal service and for each of the schedules.
•• Telco features These commands allow you to assign settings for an external voice message
service.
••• VMsg center 1 (1-4) Assign a VMsg center to be used for voice message service for the line.
•••• Use: Choose the route the system will use to access the external voice mail center.
•••• Tel # Enter the telephone number that access the voice mail center.
Services These commands allow you to create services such as night ringing, routing,
and restrictions for making external calls.
• Ringing service Assign additional telephones to ring for a line during specified periods of the
day or night.
•• Ringing groups Allow groups of extended ringing sets to be defined.
••• Show group:_ Enter the number of the Ringing group you want to program (001-100).
•••• Ring grp 001 Enter the valid ring group number from 001 to 100. All ring groups have set
211 assigned to them.
••••• Show set:_ Enter the number of the set you wish to assign to this Ringing group or use
LIST to display the valid sets added to this Ringing group.