Nortel Networks ICS 6.1 - Manual (Page 97)

88
Modular ICS 6.1 Programming Record P0603536 02
••• Line/set rstrns Assign restriction filters to certain lines on each set in your system.
•••• Show line:_ Select the line on this telephone for which the restriction will apply.
••••• Normal
••••• Night
••••• Evening
••••• Lunch
••••• Sched 4
••••• Sched 5
••••• Sched 6
For each line, enter the number (two-digit) of the restriction filter to apply
during normal service and each of the schedules.
•• Telco features These commands allow you to program how the Norstar system works with
features and services that are based in the public network or other outside
source, namely Call Display or an external voice message service.
••• Feature assign Use these commands to assign features, such Call Display, to identify
external in-coming calls.
•••• Show line:_____ Enter the number of the line for which the telephone will show Call Display
information.
••••• Caller ID set Select whether the telephone will display incoming CLID.
••••• Extl VMsg set Select whether this telephone will display a message indicator provided to the
specified line by an external voice message service.
••• 1stDisplay Select call information to be displayed first: name of caller, number of caller,
or name of line in your Norstar system that the call is on.
••• Called ID Select if Called ID is to be displayed.
••• Log space Allocate a number of Call log spaces from a system-wide pool of spaces to
the telephone.
•••• Log: Pool: Assign this telephone its log spaces.
Lines These commands allow you to assign settings to each trunk and external line.
• Show line:_ Enter the line number of the line you want to program.
• Line001:Line001 Display of the line number and current line name.
•• Trunk/Line data Use to program settings for physical lines that affect how the line is used by
the Norstar system.
••• Trunk type This entry is determined by the cartridge or card installed in the KSU slot. This
setting also allows you to determine if the lines is supervised or not
supervised.
••• Line type Select how a line will be used by telephones in the system.
Choose Public to be able to assign the line to any telephone.
Choose Private to make the line private to a telephone.
Enter the DN of the telephone you want to assign to the line.
Choose Pool to place the line in a line pool (A to O).
••• Dial mode Select the appropriate dial mode for the line.
The dial mode must match the dial mode setting of the line at the central office
on the public network. The default is tone. This setting does not appear for
target lines.
••• PrimeSet Enter the DN of a prime telephone as a backup to answer calls on this line.