Nortel Networks ICS 6.1 User Manual
Page 102
93
P0603536 02
Modular ICS 6.1 Programming Record
• Common settings
Use these commands to assign settings that are shared by different services.
•• Control sets
Assign control telephones to turn services on or off.
••• For lines
Select lines for settings and services.
•••• Show line:_
Enter the number of the line you want to program.
•••• L001
Assign a control telephone to each external line that will controls services for
the line.
••• For sets
Select the sets affected by this service.
•••• Show set:_
Enter the number of the telephone you want to program.
••••
Assign a control telephone to each telephone. This telephone controls
Restriction service and Routing service for the set.
•• Schedule names
The schedule name is shown on the display of the control telephone when the
schedule is turned on. It identifies the active schedule.
••• Sched 1
••• Sched 2
••• Sched 3
••• Sched 4
••• Sched 5
••• Sched 6
Enter the name of the schedule, or use the default numbering.
•• Schedule times
Enter automatic start and stop times for scheduled services.
••• Monday
Assign the schedule times for Monday, as it applies to your office.
•••• Sched:Night (Evening, Lunch,
Sched 4, Sched 5, or Sched 6)
Select the schedule as it applies to your office.
••••• Start time
Enter the start time.
••••• Stop time
Enter the stop time.
••• Tuesday
••• Wednesday
••• Thursday
••• Friday
••• Saturday
••• Sunday
Assign scheduled start and stop times for each scheduled service and day of
week, as you have done for Monday.
Sys speed dial
These commands allow you to create speed dial codes that can be used by
any telephone in the system.
• Speed dial #
Enter the three-digit speed dial code (001-255) that you want to program.
•• XXX:
Enter the telephone number (up to 24 digits) that you want to assign to it.
•• Use prime line
Select the line to use for dialing this speed dial number.
If you select Use routing table, the number dialed is treated as a routing
destination code.
•• Display digits
Select whether a telephone displays the number dialed when a speed dial
number is used.