Nortel Networks ICS 6.1 - Manual (Page 108)

99
P0603536 02 Modular ICS 6.1 Programming Record
• Remote access Use these commands to create a system of controlled access to your Norstar
system.
•• Remote access pkgs Create packages to apply to lines that allow or restrict the remote access to
Norstar line pools and/or to paging.
••• Show pkg:_ Enter the two-digit remote package number (00-15). Package 00 is pre-set to
allow no access.
•••• LinePool access For each package, select whether the user will have access to the system line
pools.
••••• Pool
code)>
For each line pool, select whether a remote user can have access.
•••• Remote page For each package, select whether a remote user can access the Page
feature.
•• Rem line access Select the remote access packages to be applied.
••• Show line:_ Enter the line number.
• Change DN type
(MICS-XC systems, only)
These commands allow you to change DN types for the range of DNs that are
available to either portable telephones or ISDN terminal equipment.
•• Show DN:_ Enter the DN for which you want to change the DN type.
••• 637 Select whether this DN is reserved for use with a portable telephone or with
ISDN terminal equipment.
•••• State Use this softkey item to see whether a portable has been assigned to the DN.
Companion
(MICS-XC systems, only)
These commands allow you to set up base stations and program the
portables in your Companion system.
• Registration Use these commands to register the portables to the system.
•• Registration Turn portable registration on or off.
•• Portable DNs Identify the access line to which a portable is registered.
••• Show DN:_ Display the DN of the portable.
• Radio data These commands allow you to initiate a re-evaluation of the radio status.
•• Re-evaluation This command automatically assigns base stations to cells and defines the
cell configuration.
••• Status Identify the status of the Re-evaluation.
••• Schedule
• Radios These commands provide information about cell assignment and antenna
type.
•• Cell assignment View whether a radio is assigned to a cell or unassigned.
••• Show radio Enter the number of the radio.
•• Antenna type Indicate the type of antenna selected for each base station.
••• Show radio Enter the number of the radio.