Nortel Networks ICS 6.1 User Manual
Page 106
97
P0603536 02
Modular ICS 6.1 Programming Record
•• Silent Monitor
Use this command to determine if the Silent Monitoring feature will emit a
conference tone when supervision occurs. (Y = tone; N = no tone)
•• CLID Match
Use this command to determine how many digits an incoming calls must
match to a System Speed Dial listing to allow the speed dial name to display
for the call.
• Direct-dial
Select whether an internal or external number is used for the Direct-dial
telephone.
•• D-Dial 1
Enter the internal or external numbers that the system will automatically dial
when someone enters the Direct-dial digit.
••• Intrnl#
Enter the DN number of the direct-dial telephone. If it is an external number,
you will also have to choose how the outgoing call is made.
•• D-Dial 2
•• D-Dial 3
•• D-Dial 4
•• D-Dial 5
Program the settings for each direct-dial telephone, as you did for Set 1.
• CAP/KIM assignment
Use these commands to assign the DNs of telephones to a the central
answering position (CAP) which can be composed of one or more CAP
modules attached to a M7234 telephone or one or more KIMs attached to a
T7316E BST telephone.
•• CAP 1 or KIM1
•• CAP 2 or KIM2
•• CAP 3 or KIM3
•• CAP 4 or KIM4
•• CAP 5 or KIM5
Enter the DN of the CAP telephones.
• Dialing plan
•• Private network
If you are networking your system using dedicated PRI lines, you need to set
up the same dialing plan on all nodes of the system.
••• Type
(None, CDP, UDP)
This fields defines the type of dialing plan.
••• PrivNetID
(CDP and UDP only) This is the unique network identifier for each node.
••• Loc code
(UDP only) This is the code that provides access to a UDP-based node.
••• Priv DN len
This is the number of digits the nodes require to recognize where the
information needs to be routed.
•• Public network
If you are networking through PSTN public lines, you can specify which
numbers will be recognized as belonging to the system.
••• Pub DN lengths
This is the DN length the system will recognize
•••• Show prefix
These are the prefixes the system will recognize.
•••• Prfx: Deflt
••••• DN length
•• Dial timeout
This is the timer for releasing a call that cannot be routed over the network.
••• Dial timeout