Nortel Networks ICS 6.1 - Manual (Page 9)

1
P0603536 02 Modular ICS 6.1 Programming Record
General information
All defaults for the default templates are shown in bold and underlined text.
Copying set programming
You can use the COPY command to copy programming from one telephone to other set, a range of sets or all the sets. Depending on
where the display button is pressed, you will copy either all the programming for a telephone or only the programming found under one
of the individual sub-headings.
For general set copying, you can choose what part of the programming will be used. The choices are:
•
System
–
the system administration programming (system data) of a set
•
System + User
–
the system administration programming PLUS the programming for a particular set (user data), with the follow-
ing exceptions:
Customer/Company Supplier
Address Customer service representative
Telephone
Telephone
Billing number Installer
System coordinator Installation date
System Data that copies
Line access
Line assignment
Answer DNs (unless Answer button DN is same as set being copied
to)
Line pool access
Prime line designation
Number of intercom keys
Restrictions
Line/set restrictions
Set restrictions
Set Lock
Allow Last Number Redial
Allow Saved Number Redial
Allow Link
Capabilities
Allow Redirect
Call Forward No Answer (DN or Route + number + delay)
Call Forward Busy (DN or Route + number)
Redirect Ring
Auxiliary Ringer
DND on Busy
Hotline
Handsfree Answerback
Handsfree Setting
Direct-dial (which set is reached
by the D-Dial digit)
Pickup Group
Paging
Paging Zone
Priority call
SLR redirection
Receive tones
ATA ans timer
MsgIndicate (for ATA)
Telco Features
Call log set ( Logging set )
1stDisplay
System data that does not copy
Line access
Private line appearances
Capabilities
Set Name
Telco features
Log space
Passwords
Call log password
CAP/KIM assgn
Direct-dial set designation
ExtraDial set designation
Service mode ringing set designation
Prime set designation for a line
Hunt group appearances
SM Supervisor
User data that copies
Language choice
Ring type
Calls log options (
Auto logging)
Display contrast
Dialing options (automatic, predial, stan-
dard)
User data that copies if
destination set type is the same as
the source set type
External autodial button assignments
Internal autodial button assignments
Programmable button assignments User data that does not copy
CAP/KIM memory button assignments
Ring volume
User speed dial entries