Nortel Networks ICS 6.1 User Manual

Page 96

P0603536 02

Modular ICS 6.1 Programming Record

•••••• Voice Deny:F88

Use to prevent the set from receiving voice calls.

•••••• MCID:F897

ESTI lines only: If service is active from the service provider, this feature
saves current caller information at the service provider system.

•••••• Language:F*501

Select the display language. (501 = first language; 502 = second language;
503 = third language

•••••• Sil Mon:F*550

Allows users at a supervisor terminal to monitor external Hunt group calls.

•••••• Contrast:F*7

Use to adjust contrast of display

•••••• Static time:F806

Change the first line of the display to the current time and date.

•••••• Call:F*520 .... F*535

These 16 System-wide Call Appearance (SWCA) feature codes can be
programmed onto memory buttons with indicators to provide call parking
within a group of telephones that share the same SWCA button assignment.

••• User speed dial

Use these commands to program user speed dialers. (codes: 256 to 279)

••• Call log opt’ns

Select whether the set will log all calls, no calls, or only unanswered calls.

••• Dialing opt’ns

Select standard dial, pre-dial, or automatic dial.

••• Language

Choose the display language: English, French or Spanish.
Note: Language choices depend on system setup.

••• Display cntrst

Select a display contrast level.

••• Ring type

Select a ring type.

•• Restrictions

Use these commands to create and assign restriction filters. These filters are
used to prevent a user from making certain kinds of calls from a telephone
during normal or scheduled operation periods.

••• Restrn filters

••• Set restrns

Select restrictions for specific set or all sets.

•••• Filters

Choose the filter you want to program.

••••• Normal

••••• Night

••••• Evening

••••• Lunch

••••• Sched 4

••••• Sched 5

••••• Sched 6

For each line, enter the number (two-digits) of the restriction filter to apply
during normal service and each of the schedules.

•••• Set lock

Select the level of personal programming and customizing that can be
performed at a telephone.

•••• Allow last no

Select whether a telephone can use Last Number Redial (

²Þ

•••• Allow saved no

Select whether a telephone can use Saved Number Redial (

²ßà

•••• Allow link

Select whether a telephone can use Link (

²àÚ

) to access the features

of a private branch exchange.