Nortel Networks ICS 6.1 User Manual

Page 101

Modular ICS 6.1 Programming Record

P0603536 02

•• Dest codes

Define which routes are used when a destination code is dialed.

••• Show DstCode:_

Up to 500 destination codes are programmable.
Enter up to seven digits of the destination code that you want to use to define
a route.
Destination codes must be unique.
A destination code cannot begin with a digit assigned as:

• Call Park prefix
• Direct-dial digit
• same as, or be the start digits of a DN, the DISA DN or the Auto DN
• line pool code
• received number.

••• DestCode:_

Enter the new destination code.

••• DestCode:

Shows the destination code you wish to view.

•••• Normal

For the last destination code, define the normal service. Use the route that
has the lowest cost for the times when normal service is in use.

••••• AbsorbLength

Enter the number of digits from the destination code that will be dropped
before the number is dialed out.

•••• Night

Each of the next six schedules allow you to define three possible routes that
an outgoing call may take.

••••• First route

••••• Absorb Length

••••• Second route

••••• Absorb Length

••••• Third route

••••• Absorb Length

Enter route numbers and determine the amount of the destination code that
needs to be suppressed to use these routes.
The routes are listed in hierarchal order. The system attempts the first route,
first, and only moves to the second route if the first route is not available. If
the second route is also not available, the call will attempt to use the third
route. If none of the routes are available, the call will go to the overflow route,
if one has been specified.

•••• Evening

•••• Lunch

•••• Sched 4

•••• Sched 5

•••• Sched 6

For the last destination code, define a route for each of the schedules that you
want to activate for this code.

•• Sched:Night

This schedule can be activated automatically or manually, or it can be left in
the default Off.

••• Service

Select how you want this service activated, if applicable.

••• Overflow

For each schedule, choose whether you want a destination code to use the
route assigned to normal service when the route assigned to the schedule is
busy.

•• Sched:Evening

•• Sched:Lunch

•• Sched:Sched 4

•• Sched:Sched 5

•• Sched:Sched 6

Select how you want each of the scheduled services to be activated, and
whether a destination code uses the route used with normal service when the
route used with the schedule is busy.