Show spanningtree cst port detailed, Config spanningtree cst port pathcost, Show spanningtree cst port detailed -51 – NETGEAR 7200 Series Layer 2 Managed Switch Software User Manual
Page 93: Config spanningtree cst port pathcost -51
User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
Switching Commands
7-51
202-10010-01
show spanningtree cst port detailed
This command displays the settings and parameters for a specific switch port within the common
and internal spanning tree. The
Format
show spanningtree cst port detailed
Port Identifier
The port identifier for this port within the CST.
Port Priority
The priority of the port within the CST.
Port Forwarding State
The forwarding state of the port within the CST.
Port Role
The role of the specified interface within the CST.
Port Path Cost
The configured path cost for the specified interface.
Designated Root
Identifier of the designated root for this port within the CST.
Designated Port Cost
Path Cost offered to the LAN by the Designated Port.
Designated Bridge
The bridge containing the designated port.
Designated Port Identifier Port on the Designated Bridge that offers the lowest cost to the LAN.
Topology Change
Acknowledgement
Value of flag in next Configuration Bridge Protocol Data Unit (BPDU)
transmission indicating if a topology change is in progress for this port.
Hello Time
The hello time in use for this port.
Edge Port
The configured value indicating if this port is an edge port.
Edge Port Status
The derived value of the edge port status. True if operating as an edge port; false
otherwise.
Point To Point MAC Status Derived value indicating if this port is part of a point to point link.
CST Regional Root
The regional root identifier in use for this port.
CST Port Cost
The configured path cost for this port.
config spanningtree cst port pathcost
This command sets the Path Cost to a new value for the specified port in the common and internal
spanning tree. The
a number in the range of 1 to 200000000 or auto. If "auto" is specified, the pathcost value will be
set based on Link Speed.
Default
auto
Format
config spanningtree cst port pathcost
200000000/auto>