beautypg.com

NETGEAR 7200 Series Layer 2 Managed Switch Software User Manual

Page 27

background image

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software

Administration Console Telnet Interface

4-3

202-10010-01

4.

When the following screen appears, make sure that the port setting are as follows:

Baud Rate:

9600

Data Bits:

8

Parity: None

Stop Bits:

1

Flow Control:

None

Figure 4-4: Connection Settings

5.

Click OK.

The HyperTerminal window opens and you should be connected to the switch. If you do not get a
welcome screen or a system menu, hit the return key.

When attached to the User Interface via a Telnet Session, the following must be set in order to use
the arrow keys: Under the terminal pull down menu, choose Properties and make sure the VT100
Arrows option is turned on.

See also other documents in the category NETGEAR Hardware: