NETGEAR 7200 Series Layer 2 Managed Switch Software - Manual (Page 87)

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
Switching Commands 7-45
202-10010-01
If all is selected, all ports will be removed from the source port filter set.
Format config macfilter delsrc
config macfilter adddest
This command adds the to the destination filter set for the MAC filter with the given
and VLAN of . The parameter must be specified as a 6-byte
hexadecimal number in the format of b1:b2:b3:b4:b5:b6.
The parameter must identify a valid VLAN.
The parameter identifies the destination port to be added to the destination port filter
set for the MAC filter.
If all is selected, all ports will be added to the destination port filter set.
Format config macfilter adddest
config macfilter deldest
This command removes a port from the destination filter set for the MAC filter with the given
and VLAN of . The parameter must be specified as a 6-byte
hexadecimal number in the format of b1:b2:b3:b4:b5:b6.
The parameter must identify a valid VLAN.
The parameter identifies the destination port to be removed from the destination port
filter set for the MAC filter.
If all is selected, all ports will be removed from the destination port filter set.
Format config macfilter deldest
Spanning Tree Commands
This section provides detailed explanation of the spanning tree commands. The commands are
divided into two functional groups: