NETGEAR 7200 Series Layer 2 Managed Switch Software - Manual (Page 21)

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
Command Line Interface Syntax 3-1
202-10010-01
Chapter 3
Command Line Interface Syntax
The Command Line Interface (CLI) syntax, conventions and terminology are described in this
section. Each CLI command is illustrated using the structure outlined below.
Format
Commands are followed by values, parameters or both.
Example 1
config network parms [gateway]
• config network parms is the command name.
• <ipAddr> are the required values for the command.
• [gateway] is the optional value for the command.
Example 2
config syslocation
• config syslocation is the command name.
• <location> is the required parameter for the command.
Example 3
config lag deleteport
• config lag deleteport is the command name.
• are the required values for the
command.