NETGEAR 7200 Series Layer 2 Managed Switch Software - Manual (Page 91)

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
Switching Commands 7-49
202-10010-01
config spanningtree bridge maxage
This command sets the Bridge Max Age parameter to a new value for the common and internal
spanning tree. The maxage is in whole seconds within a range of 6 to 40, with the value
being less than or equal to "2 times (Bridge Forward Delay - 1)".
Default 20
Format config spanningtree bridge maxage <6-40>
config spanningtree bridge hellotime
This command sets the Hello Time parameter to a new value for the common and internal
spanning tree. The hellotime is in whole seconds within a range of 1 to 10 with the value
being less than or equal to "(Bridge Max Age / 2) - 1".
Default 2
Format config spanningtree bridge hellotime <1-10>
config spanningtree bridge forwarddelay
This command sets the Bridge Forward Delay parameter to a new value for the common and
internal spanning tree. The forwarddelay is in whole seconds within a range of 4 to 30,
with the value being greater than or equal to "(Bridge Max Age / 2) + 1".
Default 15
Format config spanningtree bridge forwarddelay <4-30>
config spanningtree bridge priority
This command sets the Bridge Priority parameter to a new value for the common and internal
spanning tree. The bridge priority is a number within a range of 0 to 61440. The twelve
least significant bits will be masked according to the 802.1s specification. This will cause the
priority to be rounded down to the next lower valid priority.
Default 32768
Format config spanningtree bridge priority <0-61440>
show spanningtree cst detailed
This command displays spanning tree settings for the common and internal spanning tree.