NETGEAR 7200 Series Layer 2 Managed Switch Software - Manual (Page 97)

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
Switching Commands 7-55
202-10010-01
show spanningtree mst port summary
This command displays the settings of one or all ports within the specified multiple spanning tree
instance. The parameter indicates a particular MST instance. The parameter all> indicates the desired switch port or all ports.
Format show spanningtree mst port summary
all>
MST Instance ID The MST instance associated with this port.
Slot.Port The interface being displayed.
Type Currently not used.
STP State The forwarding state of the port in the specified spanning tree instance.
Port Role The role of the specified port within the spanning tree.
Link Status The operational status of the link. Possible values are “Up” or “Down”.
Link Trap The link trap configuration for the specified interface.
show spanningtree mst port detailed
This command displays the detailed settings and parameters for a specific switch port within a
particular multiple spanning tree instance. The instance is a number that corresponds to
the desired existing multiple spanning tree instance. The is the desired switch port.
Format show spanningtree mst port detailed
MST Instance ID
Port Identifier
Port Priority
Port Forwarding State Current spanning tree state of this port.
Port Role
Port Path Cost Configured value of the Internal Port Path Cost parameter.
Designated Root The Identifier of the designated root for this port.
Designated Port Cost Path Cost offered to the LAN by the Designated Port.
Designated Bridge
B
ridge Identifier of the bridge with the Designated Port.
Designated Port Identifier Port on the Designated Bridge that offers the lowest cost to the LAN.
show spanningtree vlan
This command displays the association between a VLAN and a multiple spanning tree instance.
The corresponds to an existing VLAN ID.
Format show spanningtree vlan