NETGEAR 7200 Series Layer 2 Managed Switch Software - Manual (Page 37)

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
Quick Startup 6-5
202-10010-01
Default Gateway - The default Gateway for this interface
Default value is 0.0.0.0
Burned in MAC Address - The Burned in MAC Address used for
in-band connectivity
Locally Administered MAC Address - Can be configured to allow
a locally administered MAC address
MAC Address Type - Specifies which MAC address should be
used for in-band connectivity
Network Configurations Protocol Current - Indicates which
network protocol is being used
Default is DHCP
Java Mode - Specifies whether the switch should allow the Java
applet to show the interactive switch graphic (see
“Interactive
Switch Image” on page 5-3 )
Default is enable
config network parms config network parms
IP Address range from 0.0.0.0 to 255.255.255.255
Subnet Mask range from 0.0.0.0 to 255.255.255.255
Gateway Address range from 0.0.0.0 to 255.255.255.255
Table 6-4. Quick Startup IP Address
Command Details