Clear lag, Clear stats port, Clear stats switch – NETGEAR 7200 Series Layer 2 Managed Switch Software User Manual
Page 121: Clear igmpsnooping, Reset system, Clear lag -79, Clear stats port -79, Clear stats switch -79, Clear igmpsnooping -79, Reset system -79
User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
Switching Commands
7-79
202-10010-01
clear lag
This command clears all LAGs.
Format
clear lag
clear stats port
This command clears the stats for a specified
Format
clear stats port
clear stats switch
This command clears the stats for the switch.
Format
clear stats switch
clear igmpsnooping
This command clears the tables managed by the IGMP Snooping function and will attempt to
delete these entries from the Multicast Forwarding Database.
Format
clear igmpsnooping
reset system
This command resets the switch without powering it off. Reset means that all network connections
are terminated and the boot code executes. The switch uses the stored configuration to initialize
the switch. You are prompted to confirm that the reset should proceed. A successful reset is
indicated by the LEDs on the switch.
Format
reset system