NETGEAR 7200 Series Layer 2 Managed Switch Software - Manual (Page 114)

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
7-72 Switching Commands
202-10010-01
config dot1x defaultlogin
This command assigns the authentication login list to use for nonconfigured users for 802.1x port
security. This setting is overridden by the authentication login list assigned to a specific user if the
user is configured locally. If this value is not configured, users will be authenticated using local
authentication only.
Format config dot1x defaultlogin
config dot1x login
This command assigns the specified authentication login list to the specified user for port security.
The
must be a configured and the must be a configured login list.
Format config dot1x login
config dot1x port users add
This command adds the specified user to the list of users with access to the specified port. The
must be a configured and the must be a valid port. By default, a user is
given access to all ports.
Default Access to all ports
Format config dot1x port users add
config dot1x port users remove
This command removes the specified user from the list of users with access to the specified port.
Format config dot1x port users remove
config users defaultlogin
This command assigns the authentication login list to use for non-configured users when
attempting to log in to the system. This setting is overridden by the authentication login list
assigned to a specific user if the user is configured locally. If this value is not configured, users will
be authenticated using local authentication only.
Format config users defaultlogin