NEC Express 5800/320Lc User Manual
Page 94
3-20 Windows Setup and Operation
If the system is rebooted during synchronization, the process cannot be completed.
Do not restart the system until the synchronization is completed.
8.
When the [Op State: State] of [RDR Virtual Disk x](x=1,2,3) becomes [Duplex] and
[Status] becomes [None], the disk synchronization is completed.
IMPORTANT:
When a new partition is created on the disk where RDR is set, the created
partition area is synchronized automatically.
When the disk where RDR is set is converted to a dynamic disk, the area which
has not been synchronized (the area that no partition exists) will be synchronized.
When the system is shut down without shutting down Windows properly, for
example, by pressing the power button, the entire area of the synchronized disks
will be resynchronized after the system is restarted.