NEC Express 5800/320Lc - Manual (Page 225)

5-62 Installing and Using Utilities
Procedure in ft server utility
1. Select the target CPU module by using the ft server utility.
2. Check the current state of the target CPU module with the LEDs.
3. Select the dump acquisition method with [Dump] of the target CPU module and click the
[Harvest] button.
A certain time is required for the dump acquisition.
The dump is stored as %SystemDrive%\NECDump\MEMORY.DMP on the server.
The result of the dump acquisition can be confirmed in the event log.
Sample screen of ft server utility
[CPU Module]