NEC Express 5800/320Lc - Manual (Page 308)

System Upgrade 8-7
Installing 3.5-inch Hard Disk Drive
Follow the procedure below to install the hard disk. A hard disk may be installed in another slot in
the same procedure.
IMPORTANT:
Make sure to read "Anti-static Measures" and "Preparing Your System for Upgrade" before
starting installing or removing options.
Install two hard disks for dual disk configuration before starting Windows Server 2003,
Enterprise Edition. Make sure to configure the hard disks as dual disk.
1. Shutdown Windows Server 2003, Enterprise Edition.
The system turns off automatically.
2. Disconnect all the power cords from the power outlet.
3.
Unlock the front bezel with the security key and open it.
Unlock the front bezel with the security key and remove the upper and lower panels.
4. Identify the slot to which you want to install the hard disk.
Install a hard disk in an empty slot in the group, starting from the left slot.
5. Unlock the lever of the dummy trays and
remove the trays by pulling the handles
(handles need to be brought forward to be
pulled).
All the slots except Slot 1 have a dummy
tray.
IMPORTANT: Carefully keep the
removed dummy tray.
6. Unlock the hard disk to be added.