NEC Express 5800/320Lc - Manual (Page 200)

Installing and Using Utilities 5-37
2. Confirmation of mirror status
To check the redundancy status of the failed mirror disk, open [Mirror Disk] screen under
[FTServer]. On this screen, you can check the redundancy status of the mirror and the
status of the mirrored hard disks.
[Mirror Disk]
IMPORTANT:
The mirroring redundancy status will change depending on the status of the two hard disks
that make up a mirror as follows:
Status of hard disk 1 Status of hard disk 2 Status of mirror volume
Duplex Normal
Simplex -
Duplex
Others Warning
Duplex -
Simplex Normal
Simplex
Others Warning
Duplex Warning
Simplex Warning
Others
Others -
“-”: No status is shown.
TIPS: Unless the hard disks make up a mirror, the Mirror Disk screen does not show any
information.