Supplement, Application log registered when system starting, Dual registration of event logs – NEC Express 5800/320Lc User Manual
Page 183: Maintenance-related functions, Cpu information
5-20 Installing and Using Utilities
Supplement
Note the following when using NEC ESMPRO Agent.
Application log registered when system starting
·
Source: About the event of Perflib
When system is starting, Perflib log may be registered to the application log.
The detailed information about an event log is described on Microsoft Product
Support Services. Please check the contents.
- [INFO] Events for Performance Monitor Extensions
http://support.microsoft.com/default.aspx?scid=kb;en-us;226494
- Application Log Events Generated When You Start Performance Counter Query
http://support.microsoft.com/default.aspx?scid=kb;en-us;296187
- Event ID 2003 Warning Message Logged When Loading Performance Counters
http://support.microsoft.com/default.aspx?scid=kb;en-us;267831
Visit the Microsoft Help and Support on regular basis where you can find other information than the
above at
http://support.microsoft.com/default.aspx?LN=en-us.
Dual registration of event logs
At some types of errors, two event logs may be registered for a single occurrence. (However, in the
case of NEC ESMPRO Manager, one log is reported for one occurrence.) Such errors are as
follows:
- Temperature error
- Voltage error
- Thermal trip
Maintenance-related Functions
When you want to use maintenance-related functions of the NEC Express5800/ft series, contact
your maintenance personnel.
CPU Information
If you select [CPU Module]–[CPU] in the FTServer tree of the data viewer, unknown or incorrect
information appears in some information items.
The CPU information can be viewed by selecting [System]–[CPU] in the NEC ESMPRO MIB tree.
Change of Installation States of CPU and PCI Modules
If you dynamically change the configuration of the CPU or PCI module in the relevant system
during review of the server information by using the data viewer, the message prompting you to
reconstruct the tree of the data viewer will appear. If you click the [Yes] button, the tree is
reconstructed in the data viewer to reflect the change of the system configuration on the data viewer.